American Standard C-channels, also known as steel channels, are versatile structural shapes widely used in construction, manufacturing, and various other industries. Their C-shaped profile provides excellent strength-to-weight ratio, making them ideal for applications requiring load-bearing capacity without excessive weight. This article focuses specifically on 10-inch C-channels, exploring their dimensions, properties, applications, and how they fit within the broader context of American Standard C-channel sizing.
Understanding the Designation System:
Before delving into the specifics of a 10 C channel, it's crucial to understand how American Standard C-channels are designated. The system typically uses a two-part nomenclature. For example, a "C10x15.3" channel indicates:
* C: Denotes a channel section.
* 10: Represents the nominal depth (height) of the channel in inches. This is often rounded and doesn't always precisely represent the actual depth.
* 15.3: This figure represents the weight of the channel in pounds per linear foot. This is a critical factor determining the channel's load-bearing capacity.
Therefore, understanding the nominal depth and weight per foot is essential to selecting the appropriate channel for a specific application. It's important to note that minor variations in dimensions can exist between manufacturers due to manufacturing tolerances. Always consult the manufacturer's specifications for precise dimensions.
10 C Channel Dimensions: A Closer Look at C10x15.3 and Beyond
While "C10x15.3" is a common designation, it's not the only 10-inch C-channel available. The actual dimensions, such as flange width, thickness, and overall depth, vary depending on the weight per foot. A heavier C10 channel will generally have thicker flanges and web, resulting in increased strength and stiffness. However, this also increases the weight and cost.
Let's examine the typical dimensions of a C10x15.3 channel, understanding that these are approximate values and can vary slightly based on the manufacturer:
* Nominal Depth: Approximately 10 inches. The actual depth might be slightly less.
* Flange Width: Around 2 to 2.5 inches. The exact width depends on the specific manufacturer and variations within a given weight designation.
* Flange Thickness: Typically ranging from 0.25 to 0.375 inches, again varying depending on the manufacturer and tolerances.
* Web Thickness: Usually between 0.1875 and 0.25 inches. Variations exist based on manufacturer and weight per foot.
* Weight per foot: 15.3 lbs/ft (this is the defining characteristic of this specific channel).
These dimensions significantly impact the channel's structural performance, including its moment of inertia (resistance to bending), section modulus (resistance to bending stress), and radius of gyration (resistance to buckling). Engineers use these properties to calculate the channel's capacity to withstand various loads and stresses.
C Channel Size Chart and American Standard Channel Size Chart:
current url：https://qsderg.e847z.com/products/c-chanel-10-91586